Home Security Products

Home Security Products

2Gig Control Panel

2gig Go!Control Panel

The 2gig Go!Control Panel, the first all-in-one security and home management system, is the foundation for all security systems that are installed by True Protection.

  • Color Touchscreen

    The touchscreen interface found on the Go!Control panel is accessible from your computer, tablet, and web-enabled phone. This provides you with access and control whenever and wherever you need it.

  • GSM (cellular) Radio

    The most reliable communication option available in the industry. No more concern with cut phone lines or the elimination of residential phone lines altogether.

  • Two-Way Voice

    Go!Control allows your central monitoring station to listen in and talk to you when a signal or alarm is received.

  • Z-Wave RF Protocol

    You can now control lighting, HVAC and other Z-Wave appliances in your home right from the control panel, web-enabled phone or the Internet. No need for extra hardware

• Fully self contained
• Snap-in GSM radio
• Remotely control panel settings
• Two-way voice over cellular
• Over the air updates functionality
• Built in z-wave home control
• Customer messaging capabilities
• 48 wireless zones
• 2 hardwired zones
• Weather information display
• 24-hour backup battery
• 32 user codes


secondary color touch screen

The TS1 Touch Screen is another alternative for a secondary control panel inside your home. There can be up to 4 TS1 panels per system. These panels are an extension of your main Go!Control Panel and operate with the same user interface.

  • Arm/disarm the system

  • Control z-wave devices

  • Available in English or French

  • See and hear system status and chimes

  • Bright 4.3’ LCD touch screen

  • Same user interface as the Go!Control panel

  • Operates on 9-14vdc power


wireless 2gig keyfob

The key fob enables you to turn the 2GIG system on and off before entering the home or after exiting. If there is an emergency, you can turn on the siren and automatically call the central monitoring station. If lamp modules have been installed, you can use the key fob to turn all system‐controlled lights on or off via the open collector

  • Arms system in STAY or AWAY mode

  • Disarms system

  • Auxiliary output and emergency functions

  • Lithium coin battery with 5 years life


secondary wireless keypad

For the homeowners who enjoy the convenience of having an additional Keypad, this Wireless Keypad can be placed anywhere in your home. The more traditional layout of the Secondary Wireless Keypad allows you to arm your system in Stay or Away mode, disarm your system, and access both the fire and panic functions.

  • Arms system in stay or away mode

  • Disarms system

  • Fire and panic emergency functions

  • Lithium coin batteries with 5 years life

Super Switch

super switch takeover module

This super switch takeover module allows us to integrate your existing wired or wireless security system with the 2gig Go!Control control panel. The super switch is mounted next to or near your existing hardwired control panel, and your existing wired or wireless equipment is then converted to a signal that communicates with the 2gig Go!Control. The existing control panel is typically in the master bedroom closet or attic, and for businesses they can be found in electrical or service closets.

  • A Single Module Converts 8 Zones, with the Ability to Add Multiple Modules

  • Integrates with 12-Volt Panels

  • Connects Easily to the Existing Control Panel’s Battery

  • Lithium coin batteries with 5 years life

Recessed Door Sensor

recessed door sensor

The Recessed Door Sensor/Contact is a sensor and magnet that is placed inside the door and the frame. When the door is opened while the equipment is armed, your alarm will sound immediately. This allows homeowners with standard hinge doors to keep the sensor out of sight, instead of having the sensor attached to the top of the door and frame.

Compact size, only 2½ in. Long


Thin Door/Window Contact

thin door and window contact

This is a wireless, tamper protected door/window sensor. This sensor is most commonly used on the windows of your home. In the event that a window is opened while your system is armed, your alarm will sound immediately.

  • Magnet Dimensions: 1.3 x 0.435 x 0.312 in.

  • Sensor Dimensions: 2.59 x 1.03 x 0.49 in.

  • Reed sensitivity: 0.625 in. minimum gap, 0.85 in. typical

  • Lithium batteries with 5 years life

  • Fully supervised

  • Tamper protected


infrared motion detector

The Passive Infrared Motion Detector monitors for motion within its area of surveillance. The Motion Detector has a 110˚ viewing spread with a 90˚ lookdown. When the Motion Detector is armed, your alarm will sound if movement is detected within a 30×50 foot range. The 2gig Motion Detector is immune to pets up to 55 Lbs.

  • Dual element sensor with 30 ft. By 50 ft. Range

  • 33 or 55 lb. Pet immune

  • 90-degree look down

  • Lithium coin batteries with 5 years life

  • 110˚ spread

  • 3 different mounting brackets

  • Tamper protected

Glass Break Detector

2gig Glassbreak Detector

Unlike the Door/Window Contact, the Glass Break Detector monitors for the sound of breaking glass. With Dual Shatter Recognition Technology, your alarm will sound as soon as broken glass has been detected within the radius of your Glass Break Detector.

  • Monitors for the sound of breaking glass

  • Two test LEDs

  • Dual shatter recognition technology

  • Lithium coin batteries with 5 years life

  • 360˚ range

  • Tamper protected

Ready to get started? Contact us today for a free quote on home security, video surveillance, or home automation.